Hardware upgrades
We offer upgrades for some of our dedicated root servers. For any questions, please send a support request via Robot to our Product Advice department.
Drive configuration options
Server Auction servers:
First, please see: https://docs.hetzner.com/robot/general/server-auction-faqs/#can-i-order-extra-hardware-for-the-servers-on-the-auction You can look at specific server models below to see which configurations are available
AX servers
Current line of AX servers: Please go to https://www.hetzner.com/dedicated-rootserver/matrix-ax/ and then click on "Configure" under the server you are interested in. When the new page loads, scroll down to "Drives". Here you can add drives and immediately see which configurations are possible and how much they cost.
AX50-SSD: In most cases, we can install up to 4 drives, meaning we can either add 2 additional drives or we can remove the default drives and install 4 new drives.
AX60-SSD: In most cases, we can install up to 4 drives, meaning we can either add 2 additional drives or we can remove the default drives and install 4 new drives.
AX100: The following combinations are possible: NVMe SSDs and SATA SSDs (up to 6x NVMe SSDs, up to 8x SATA SSDs, but maximum 8 disks in total) or 3x NVMe SSDs or SATA SSDs + 1x SATA HDD; 2x NVMe SSDs or SATA SSDs + 2x SATA HDDs; 3x SATA HDDs.
AX101: the following combinations are possible: NVMe SSDs and SATA SSDs (up to 4x additional NVMe SSDs, up to 4x SATA SSDs, but maximum 8 disks in total); up to 1x additional NVMe SSD + 1x SATA HDD; 1x SATA SSD + 1x SATA HDD; 2x SATA HDDs.
AX160: We can install up to 7xNVMe SSDs or 8xSATA SSDs or any other combination of NVMe SSDs and SATA SSDs. The maximum is are 8 disks.
AX161: The following combinations are possible: NVMe SSDs and SATA SSDs (up to 8x NVMe SSDs, up to 8x SATA SSDs, but maximum 8 disks in total); 3x NVMe SSDs or SATA SSDs + 1x SATA HDD; 2x NVMe SSDs or SATA SSDs + 2x SATA HDDs; 3x SATA HDDs.
DX servers (Dell servers):
Current line of DX servers: Please go to https://www.hetzner.com/dedicated-rootserver/brands/matrix-dell/ and then click on "Configure" under the server you are interested in. When the new page loads, scroll down to "Drives". Here you can add drives and immediately see which configurations are possible and how much they cost.
DX152: We can install up to 8xNVMe SSDs or 10xSATA SSDs or any other combination of NVMe SSDs and SATA SSDs. The maximum is 10 disks.
DX180: We can install up to 10xNVMe SSDs or 8xSATA SSDs or any other combination of NVMe SSDs and SATA SSDs. The maximum is 10 disks.
DX181: We can install up to 10xNVMe SSDs or 8xSATA SSDs or any other combination of NVMe SSDs and SATA SSDs. The maximum is 10 disks
DX292: We can install up to 8xNVMe SSDs or 10xSATA SSDs or any other combination of NVMe SSDs and SATA SSDs. The maximum is 10 disks.
EX servers
Current line of EX servers: Please go to https://www.hetzner.com/dedicated-rootserver/matrix-ex/ and then click on "Configure" under the server you are interested in. When the new page loads, scroll down to "Drives". Here you can add drives and immediately see which configurations are possible and how much they cost.
General info: In most cases, we can install up to 4 drives, meaning we can either add 2 additional drives or we can remove the default drives and install 4 new drives.
EX100: The following combinations are possible: NVMe SSDs and SATA SSDs (up to 4x NVMe SSDs, up to 4x SATA SSDs, but maximum 8 disks in total) or 3x NVMe SSDs + 1x HDD; 2x NVMe SSDs + 1x SATA SSDs + 1x SATA HDD; 2x NVMe SSDs + 2x SATA HDDs.
GEX servers
GEX44: As a general rule, it is not possible to add extra drives to our GX44 server. If you have questions, please write a support request using your account on Robot or, if you are not yet a customer, using our form here https://www.hetzner.com/support-center/
GEX130: In most cases, we can install up to 4 NVMe SSDs, meaning we can either add 2 additional drives or we can remove the default drives and install 4 new drives. You can choose from Datacenter Edition NVMe SSDs in these sizes: 960 GB, 1.92 TB, 3.84 TB, and 7.68 TB.
PX servers
General: In most cases, we can install up to 4 drives, meaning we can either add 2 additional drives or we can remove the default drives and install 4 new drives.
PX62-NVMe: The following combinations are possible: NVMe SSDs and SATA SSDs (up to 2x additional NVMe SSDs, up to 6x SATA SSDs, but maximum 8 disks in total); 1x additional NVMe SSD or 1xSATA SSD + 1x SATA HDD; 2x SATA HDDs.
PX92: The following combinations are possible: u.2 NVMe SSDs and SATA SSDs (up to 4x u.2 NVMe SSDs, up to 6x SATA SSDs, but maximum 8 disks in total); 3x u.2 NVMe SSDs or SATA SSDs + 1x SATA HDD; 2x u.2 NVMe SSDs or SATA SSDs + 2x SATA HDDs; 3x SATA HDDs.
PX93: The following combinations are possible: NVMe SSDs and SATA SSDs (up to 8x NVMe SSDs, up to 6x SATA SSDs, but maximum 8 disks in total); 3x NVMe SSDs or SATA SSDs + 1x SATA HDD; 2x NVMe SSDs or SATA SSDs + 2x SATA HDDs; 3x SATA HDDs.
RX servers
As a general rule, it is not possible to add extra drives to our RX servers. If you have questions, please write a support request using your account on Robot or, if you are not yet a customer, using our form here https://www.hetzner.com/support-center/
SX servers
As a general rule, it is not possible to add extra drives to our SX servers. If you have questions, please write a support request using your account on Robot or, if you are not yet a customer, using our form here https://www.hetzner.com/support-center/
How to order additional hardware (with drives as an example)
To order additional hardware for your server, please send us a support request via your account on Robot:
- Log onto Robot.
- Go to the "Server" tab and select the correct server.
- Click on the "Support" tab.
- On the support request, select "Product", pick the correct server, and for the reason for the request, select "Other".
- In the text box for the support request, please clearly state the type and number of drives that you would like. Also confirm that you accept the cost of the drives. (You can simply write "I accept the cost of the drives.") Please also give our technicians an appointment time when they can install the drive(s). If you want it as soon as possible, you can also write, "Please install the drive(s) as soon as possible."
Robot will send the server details and your support to the correct department. It normally takes 20-30 minutes for our support team to install the additional drives. And usually, you can make an appointment to install the extra drives 24/7. Other hardware components may take more time to install. Please include any questions you have in your support request.
Price list for additional drives
Here is a list of drives we offer and their prices:
| Drives | Monthly Price in EUR 1 | Monthly Price in USD 1 in USD | Comment |
|---|---|---|---|
| 16 TB SATA Enterprise Hard Drive | € 20.50 | $ 23.00 | not available for DX and AX160 servers |
| 22 TB SATA Enterprise Hard Drive | € 27.00 | $ 30.00 | Only for the following servers: EX44, EX101, EX130-R, EX130-S, AX42, AX52, AX102, AX162-R, AX162-S |
| 1 TB SATA SSD | € 8.50 | $ 10.00 | not available for DX line |
| 960 GB SATA SSD Datacenter Edition | € 12.70 | $ 15.00 | |
| 1.92 TB SATA SSD Datacenter Edition | € 20.50 | $ 23.00 | |
| 3.84 TB SATA SSD Datacenter Edition | € 37.00 | $ 42.00 | |
| 512 GB NVMe SSD | € 6.60 | $ 8.00 | Only for following servers: EX43 EX41/41S/51 (incl. SSD types) EX42 EX52 EX61 EX62 PX61 (incl. SSD type) PX62 AX60-SSD AX41/AX41-NVMe AX42 AX51/AX51-NVMe Maximum 2 per above mentioned server EX42-NVMe EX44 EX52-NVMe EX61-NVMe EX62-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 1 TB NVMe SSD | € 8.00 | $ 9.00 | Only for following servers: EX41/41S/51 (incl. SSD types) EX42 EX43 EX52 EX61 EX62 PX61 (incl. SSD type) PX62 AX60-SSD AX41/AX41-NVMe AX42 AX51/AX51-NVMe Maximum 2 per above mentioned server EX42-NVMe EX44 EX52-NVMe EX61-NVMe EX62-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 2 TB NVMe SSD | € 17.00 | $ 19.00 | Only for following servers: EX41/41S/51 (incl. SSD types) EX42 EX43 EX52 EX61 EX62 PX61 (incl. SSD type) PX62 AX60-SSD AX41/AX41-NVMe AX42 AX51/AX51-NVMe Maximum 2 per above mentioned server EX42-NVMe EX44 EX52-NVMe EX61-NVMe EX62-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 960 GB NVMe SSD Datacenter Edition | € 16.00 | $ 18.00 | Only for following servers: AX42 AX162-R AX162-S EX41/41S/51 (incl. SSD types) EX42 EX43 EX44 EX51-SSD-GPU EX52 EX61 EX62 PX61 (incl. SSD type) PX62 AX60-SSD AX61-NVMe Maximum 2 per above mentioned server EX62-NVMe EX61-NVMe EX52-NVMe EX42-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 1.92 TB NVMe SSD Datacenter Edition | € 26.00 | $ 29.00 | Only for following servers: AX42 AX162-R AX162-S EX41/41S/51 (incl. SSD types) EX42 EX43 EX44 EX51-SSD-GPU EX52 EX61 EX62 PX61 (incl. SSD type) PX62 AX60-SSD AX61-NVMe Maximum 2 per above mentioned server EX62-NVMe EX61-NVMe EX52-NVMe EX42-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 3.84 TB NVMe SSD Datacenter Edition | € 41.00 | $ 46.00 | Only for following servers: AX42 AX162-R AX162-S EX41/41S/51 (incl. SSD types) EX42 EX43 EX44 EX51-SSD-GPU EX52 EX61 EX62 PX61 (incl. SSD type) PX62 PX92 AX60-SSD AX61-NVMe Maximum 2 per above mentioned server EX62-NVMe EX61-NVMe EX52-NVMe EX42-NVMe PX61-NVMe Maximum 1 per above mentioned server |
| 7.68 TB NVMe SSD Datacenter Edition | € 64.00 | $ 72.00 | Not available for: AX41/AX41-NVMe AX51/AX51-NVMe |
RAM
You can upgrade a number of our dedicated root servers with more RAM. For these upgrades, Hetzner technicians only increase the amount of RAM. They don't make any other changes to the server. It usually takes our technicians 20-30 minutes to install the additional RAM. During that time, the server must be turned off.
To order a RAM upgrade for your server, please send a support request via Robot directly to our technicians. Make sure to select the correct server in the support request. Please confirm in that you accept the costs of the RAM. (You can simply write "I accept the cost of the RAM.") Please also give our technicians a time when they can install the RAM(s).
Here is a list all of the RAM upgrades we offer for our servers:
| Server | RAM Upgrade | Setup Price in € 2 | Monthly Price in € 2 | Setup Price in $ 2 | Monthly Price in $ 2 | Comment |
|---|---|---|---|---|---|---|
| EX41-SSD | Upgrade from 32 GB to 64 GB DDR4 non-ECC RAM | € 0.00 | € 8.00 | $ 0.00 | $ 9.00 | |
| EX43 | Upgrade from 64 GB to 128 GB DDR4 non-ECC RAM | € 0.00 | € 17.00 | $ 0.00 | $ 19.00 | |
| EX44 | Upgrade from 64 GB to 128 GB DDR4 non-ECC RAM | € 0.00 | € 17.00 | $ 0.00 | $ 19.00 | |
| EX52/EX52-NVMe | Upgrade from 64 GB to 128 GB DDR4 non-ECC RAM | € 59.00 | € 0.00 | $ 66.00 | $ 0.00 | |
| EX62/EX62-NVMe | Upgrade from 64 GB to 128 GB DDR4 non-ECC RAM | € 69.00 | € 0.00 | $ 77.00 | $ 0.00 | |
| EX101 | Upgrade from 64 GB to 128 GB DDR5 non-ECC RAM | € 0.00 | € 19.00 | $ 0.00 | $ 22.00 | |
| Upgrade from 64 GB to 128 GB DDR5 ECC RAM | € 0.00 | € 27.00 | $ 0.00 | $ 30.00 | ||
| Upgrade from 64 GB to 192 GB DDR5 ECC RAM | € 0.00 | € 37.00 | $ 0.00 | $ 42.00 | ||
| EX130-S | per 32 GB DDR5 ECC reg. step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 256 GB total7 |
| per 64 GB DDR5 ECC reg. step | € 0.00 | € 22.00 | $ 0.00 | $ 25.00 | Maximal 512 GB total, only over 368 GB in total7 | |
| 96 GB DDR5 ECC reg. Step | € 0.00 | € 29.00 | $ 0.00 | $ 33.00 | Maximal 768 GB total, only over 576 in total7 | |
| EX130-R | per 64 GB DDR5 ECC reg step | € 0.00 | € 22.00 | $ 0.00 | $ 25.00 | Maximal 512 GB total, only over 384 GB in total8 |
| per 96 GB DDR5 ECC reg. step | € 0.00 | € 29.00 | $ 0.00 | $ 33.00 | Maximal 768 GB total, only over 512 in total8 | |
| GEX130 | per 32 GB DDR5 ECC reg. step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 256 GB total7 |
| per 64 GB DDR5 ECC reg. step | € 0.00 | € 22.00 | $ 0.00 | $ 25.00 | Maximal 512 GB total, only over 368 GB in total7 | |
| 96 GB DDR5 ECC reg. Step | € 0.00 | € 29.00 | $ 0.00 | $ 33.00 | Maximal 768 GB total, only over 576 in total7 | |
| AX41/AX41-NVMe | Upgrade to DDR4 ECC RAM | € 0.00 | € 5.50 | $ 0.00 | $ 7.00 | |
| Upgrade from 64 GB to 128 GB DDR4 Non-ECC RAM | € 0.00 | € 27.00 | $ 0.00 | $ 30.00 | ||
| Upgrade from 64 GB to 128 GB DDR4 ECC RAM | € 0.00 | € 19.00 | $ 0.00 | $ 22.00 | ||
| AX42 | Upgrade from 64 GB ECC to 128 GB DDR5 Non-ECC RAM | € 0.00 | € 19.00 | $ 0.00 | $ 22.00 | |
| Upgrade from 64 GB ECC to 128 GB DDR5 ECC RAM | € 0.00 | € 27.00 | $ 0.00 | $ 30.00 | ||
| AX51/AX51-NVMe | Upgrade from 64 GB to 128 GB DDR4 non-ECC RAM | € 0.00 | € 17.00 | $ 0.00 | $ 19.00 | If you choose to upgrade to 128GB, the server will be fully equipped with non-ECC RAM modules. |
| Upgrade from 64 GB to 128 GB DDR4 ECC RAM | € 0.00 | € 27.00 | $ 0.00 | $ 30.00 | ||
| AX52 | Upgrade to DDR5 ECC RAM | € 0.00 | € 4.00 | $ 0.00 | $ 5.00 | |
| Upgrade from 64 GB to 128 GB DDR5 non-ECC RAM | € 0.00 | € 19.00 | $ 0.00 | $ 22.00 | ||
| Upgrade from 64 GB to 128 GB DDR5 ECC RAM | € 0.00 | € 27.00 | $ 0.00 | $ 30.00 | ||
| AX102 | Upgrade from 128 GB ECC to 192 GB DDR5 ECC RAM | € 0.00 | € 18.00 | $ 0.00 | $ 20.00 | |
| AX160 line | per 32 GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | 12 steps maximum |
| per 64 GB DDR4 step | € 0.00 | € 20.50 | $ 0.00 | $ 23.00 | 9 steps minimum, 16 steps maximum | |
| AX161 | per 32 GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | 2 steps maximum |
| per 64 GB DDR4 step | € 0.00 | € 20.50 | $ 0.00 | $ 23.00 | 9 steps minimum, 16 steps maximum | |
| AX162-R | per 32 GB DDR5 ECC reg. step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 384 GB total9 |
| per 64 GB DDR5 ECC reg. step | € 0.00 | € 22.00 | $ 0.00 | $ 25.00 | Maximal 768 GB total, only over 448 GB in total9 | |
| 96 GB DDR5 ECC reg. Step | € 0.00 | € 29.00 | $ 0.00 | $ 33.00 | Maximal 1152 GB total, only over 864 in total9 | |
| AX162-S | per 32 GB DDR5 ECC reg. step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 384 GB total10 |
| per 64 GB DDR5 ECC reg. step | € 0.00 | € 22.00 | $ 0.00 | $ 25.00 | Maximal 768 GB total, only over 448 GB in total10 | |
| 96 GB DDR5 ECC reg. Step | € 0.00 | € 29.00 | $ 0.00 | $ 33.00 | Maximal 1152 GB total, only over 864 in total10 | |
| SX64 | Upgrade from 64 GB to 128 GB DDR4 non-ECC RAM | € 0.00 | € 17.00 | $ 0.00 | $ 19.00 | If you choose to upgrade to 128GB, the server will be fully equipped with non-ECC RAM modules. |
| SX65 | Upgrade from 64 GB to 128 GB DDR4 Non-ECC RAM | € 0.00 | € 17.00 | $ 0.00 | $ 19.00 | |
| Upgrade from 64 GB to 128 GB DDR4 ECC RAM | € 0.00 | € 25.00 | $ 0.00 | $ 28.00 | ||
| SX132 | 128 -> 256 GB | € 0.00 | € 59.00 | $ 0.00 | $ 66.00 | |
| SX133 | per 32GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | 4 steps maximum |
| SX295 | per 32 GB DDR4 reg. ECC RAM step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | 16 steps maximum |
| per 64 GB DDR4 reg. ECC RAM | € 0.00 | € 20.50 | $ 0.00 | $ 23.00 | 9 steps minimum, 16 steps maximum | |
| PX62/PX62-NVMe | Upgrade from 64 GB to 128 GB DDR4 non-ECC RAM | € 0.00 | € 17.00 | $ 0.00 | $ 19.00 | If you choose to upgrade to 128GB, the server will be fully equipped with non-ECC RAM modules. |
| Upgrade from 64 GB to 128 GB DDR4 ECC RAM | € 0.00 | € 29.00 | $ 0.00 | $ 33.00 | ||
| PX91, PX91-SSD | 64 → 128 GB | € 0.00 | € 25.00 | $ 0.00 | $ 28.00 | |
| 128 → 256 GB | € 0.00 | € 59.00 | $ 0.00 | $ 66.00 | ||
| PX92, PX93 | per 32GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | 4 steps maximum |
| PX93 | per 64GB DDR4 step | € 0.00 | € 20.50 | $ 0.00 | $ 23.00 | 5 steps minimum, 8 steps maximum |
| DX141 | per 32 GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 12.00 | Maximal 256 GB total |
| DX151 | per 32 GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 384 GB total |
| DX152 | per 32 GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 768 GB total |
| DX153 | per 32 GB DDR5 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 1024 GB total, the model supports the following RAM configurations 2/4/8/12/16/24/32 DIMMs |
| per 64 GB DDR5 reg. ECC step | € 0.00 | € 22.00 | $ 0.00 | $ 25.00 | 24x64GB, 28x64GB, or 32x64GB (steps of 4 -> 24x, 28x, 32x) | |
| DX180 | per 32 GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 512 GB total |
| DX181 | per 32 GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 512 GB total |
| per 64 GB DDR4 step | € 0.00 | € 20.50 | $ 0.00 | $ 23.00 | Maximal 1024 GB total, only over 512 GB in total | |
| DX182 | per 32 GB DDR5 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 386 GB total |
| per 64 GB DDR5 step | € 0.00 | € 22.00 | $ 0.00 | $ 25.00 | Maximal 768 GB total, only over 368 GB in total6 | |
| RAM-Upgrade per 96 GB DDR5 ECC reg. Step | € 0.00 | € 29.00 | $ 0.00 | $ 33.00 | Maximal 1152 GB total, only over 768 in total6 | |
| DX291 | per 32 GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 768 GB total |
| DX292 | per 32 GB DDR4 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 768 GB total |
| DX293 | per 32 GB DDR5 step | € 0.00 | € 11.50 | $ 0.00 | $ 13.00 | Maximal 1024 GB total, the model supports the following RAM configurations 2/4/8/12/16/24/32 DIMMs |
| per 64 GB DDR5 reg. ECC step | € 0.00 | € 22.00 | $ 0.00 | $ 25.00 | 24x64GB, 28x64GB, or 32x64GB (steps of 4 -> 24x, 28x, 32x) |
Miscellaneous
The following table lists miscellaneous hardware we can install in some of our servers.
| Component | Monthly Price in EUR3 | Setup Price in EUR | Monthly Price in USD3 | Setup Price in USD | Comment |
|---|---|---|---|---|---|
| 1G NIC (Intel) | € 2.20 | € 0.00 | $ 3.00 | $ 0.00 | (NOT available for DX servers) - Windows Server 2016 not supported |
| DUAL 1G NIC (Intel i350) | € 5.50 | € 0.00 | $ 7.00 | $ 0.00 | |
| 10G NIC (Intel X520-DA1) | € 6.00 | € 0.00 | $ 7.00 | $ 0.00 | (NOT available for DX servers) |
| Dual 10G NIC (Intel X520-DA2) | € 17.50 | € 0.00 | $ 20.00 | $ 0.00 | (not available DX servers, AX servers (except AX161), SX64) |
| Dual 10G NIC (Intel X710-DA2) | € 22.00 | € 0.00 | $ 25.00 | $ 0.00 | (suitable for AX servers, SX64) (NOT available for AX160 models) |
| Dual 10G NIC | € 19.50 | € 0.00 | $ 22.00 | $ 0.00 | (for DX servers only) |
| LAN 1 Gbit | € 2.00 | € 0.0 | $ 3.00 | $ 0.00 | |
| LAN 10 Gbit | € 3.50 | € 0.00 | $ 4.00 | $ 0.00 | |
| 4-port hardware RAID controller | € 38.50 | € 0.00 | $ 43.00 | $ 0.00 | (NOT available for EX100/AX41(-NVMe)/AX51(-NVMe)/AX61-NVMe/AX101/AX160/AX161/) |
| 16-port hardware RAID controller | € 95.50 | € 0.00 | $ 106.00 | $ 0.00 | (only for SX133, SX293 and SX294) |
| BBU for RAID controller | € 13.80 | € 0.00 | $ 16.00 | $ 0.00 | |
| 5-port 1 Gbit Switch | € 2.20 | € 0.00 | $ 3.00 | $ 0.00 | |
| 8-port 1 Gbit Switch | € 2.20 | € 0.00 | $ 3.00 | $ 0.00 | |
| 24-port 1 Gbit Switch4 | € 24.50 | € 0.00 | $ 28.00 | $ 0.00 | |
| 48-port 1 Gbit Switch4 | € 166.70 | € 0.00 | $ 186.00 | $ 0.00 | |
| 12-port 10 Gbit Switch | € 53.00 | € 0.00 | $ 59.00 | $ 0.00 | |
| 48-port 10 Gbit Switch4 | € 549.50 | € 0.00 | $ 610.00 | $ 0.00 | |
| 96-port 10 Gbit Switch4 | € 765.00 | € 0.00 | $ 850.00 | $ 0.00 | |
| 10G dedicated uplink (incl. 10G NIC) | € 42.90 | € 0.00 | $ 48.00 | $ 0.00 | available for DX line, PX line, AX41/-NVMe, AX51/-NVMe, AX61-NVMe, AX101, AX161, AX60-SSD, AX160-NVMe/-SSD, SX line and EX line. Firewall feature is NOT available. |
| 16 GB USB stick | € 1.60 | € 0.00 | $ 2.00 | $ 0.00 | |
| 64 GB USB stick | € 3.00 | € 0.00 | $ 4.00 | $ 0.00 | |
| HDMI emulator for EX51-SSD-GPU | € 1.10 | € 0.00 | $ 2.00 | $ 0.00 |
The above prices do not include VAT.
Hardware configuration
Below the hardware configuration of previous server generations.
VQ Servers
| Model | Processor | RAM | Disk |
|---|---|---|---|
| VQ7 | Single Core | 512 MB RAM | 20 GB HDD |
| VQ12 | Single Core | 1024 MB RAM | 40 GB HDD |
| VQ19 | Single Core | 2048 MB RAM | 80 GB HDD |
VX Servers
| Model | Processor | RAM | Disk |
|---|---|---|---|
| VX6 | Single Core | 1 GB RAM | 25 GB HDD |
| VX11 | Dual Core | 2 GB RAM | 50 GB HDD |
| VX18 | Dual Core | 4 GB RAM | 100 GB HDD |
DS Servers
| Model | Processor | RAM | Disk |
|---|---|---|---|
| DS 3000 | AMD Athlon 64 X2 5600+ Dual Core | 2 GB DDR2 RAM | 2x 400 GB SATA II HDD |
| DS 5000 | AMD Athlon 64 X2 5600+ Dual Core | 4 GB DDR2 RAM | 2x 400 GB SATA II HDD |
| DS 7000 | AMD Athlon 64 X2 6000+ Dual Core | 6 GB DDR2 RAM | 2x 750 GB SATA II HDD |
| DS 8000 | AMD Athlon 64 X2 6000+ Dual Core | 8 GB DDR2 RAM | 2x 750 GB SATA II HDD |
EQ Servers
| Model | Processor | RAM | Disk |
|---|---|---|---|
| EQ 4 | Intel Core i7-920 Quad Core | 8 GB DDR3 RAM | 2x 750 GB SATA II HDD |
| EQ 6 | Intel Core i7-920 Quad Core | 12 GB DDR3 RAM | 2x 1500 GB SATA II HDD |
| EQ 8 | Intel Core i7-920 Quad Core | 24 GB DDR3 RAM | 2x 1500 GB SATA II HDD |
| EQ 9 | Intel Core i7-975 Quad Core | 12 GB DDR3 RAM | 3x 1500 GB SATA II HDD |
| EQ 10 | Intel Core i7-980X Hexa Core | 24 GB DDR3 RAM | Individual drive configuration |
X Servers
| Model | Processor | RAM | Disk |
|---|---|---|---|
| X2 | AMD Athlon 64 3700+ | 1 GB DDR RAM | 2x 160 GB SATA II HDD |
| X3 | AMD Athlon 64 X2 4200+ Dual Core | 2 GB DDR RAM | 2x 300 GB SATA II HDD |
| X4 | AMD Athlon 64 X2 5600+ Dual Core | 4 GB DDR2 RAM | 2x 400 GB SATA II HDD |
| X5 | AMD Athlon 64 X2 6000+ Dual Core | 8 GB DDR2 RAM | 2x 750 GB SATA II HDD |
AX Servers
See: https://www.hetzner.com/dedicated-rootserver/matrix-ax
| Model | Processor | RAM | Disk |
|---|---|---|---|
| AX10 | Samsung Exynos-5422 Octa Core | 2 GB LPDDR3 | 32 GB MicroSD |
| AX20 | Samsung Exynos-5422 Octa Core | 2 GB LPDDR3 | 64 GB eMMC |
| AX30 | Samsung Exynos-5422 Octa Core | 2 GB LPDDR3 | 32 GB MicroSD + 3 TB HDD (USB3) |
| AX50-SSD | AMD Ryzen 5 1600X Octa Core | 32 GB RAM | 2x500 GB SSD |
| AX60-SSD | AMD Ryzen 7 1700X Octa Core | 64 GB RAM | 2x500 GB SSD |
| AX51 | AMD Ryzen 7 3700x Octa Core AMD Ryzen 9 3900 12-core |
64 GB RAM ECC | 2x8 TB Enterprise HDD or 2x12 TB Enterprise HDD |
| AX51-NVMe | AMD Ryzen 7 3700x Octa Core AMD Ryzen 9 3900 12-core |
64 GB RAM ECC | 2x1024 GB M.2 NVMe SSD |
| AX61-NVMe | AMD Ryzen 9 3900 12-core | 128 GB RAM ECC | 2x1920 GB U.2 NVMe DC SSD |
| AX160-SSD | AMD EPYC 7401P 24 Core | 128 GB RAM DDR4 ECC | 2x1.92 TB SATA SSD DC Edition |
| AX160-NVMe | AMD EPYC 7401P 24 Core | 128 GB RAM DDR4 ECC | 2x960 GB NVMe SSD DC Edition |
| AX100 | AMD Ryzen Threaderipper 2950X 16 Core | 128 GB RAM DDR4 ECC | Individual drive configuration |
EX Servers
See: https://www.hetzner.com/dedicated-rootserver/matrix-ex
| Model | Processor | RAM | Disk |
|---|---|---|---|
| EX4 | Intel Core i7-2600 Quad Core | 16 GB DDR3 RAM | 2x 3 TB SATA III HDD |
| EX4S | Intel Core i7-2600 Quad Core | 32 GB DDR3 RAM | 2x 3 TB SATA III HDD |
| EX5 | Intel Core i7-920 Quad Core | 24 GB DDR3 RAM | 2x 750 GB SATA II HDD |
| EX6 | Intel Xeon E3-1245 Quad Core | 16 GB DDR3 ECC RAM | 2x 3 TB SATA III Enterprise HDD |
| EX6S | Intel Xeon E3-1245 Quad Core | 32 GB DDR3 ECC RAM | 2x 3 TB SATA III Enterprise HDD |
| EX8 | Intel Xeon E3-1275 Quad Core | 16 GB DDR3 ECC RAM | Individual drive configuration |
| EX8S | Intel Xeon E3-1275 Quad Core | 32 GB DDR3 ECC RAM | Individual drive configuration |
| EX10 | Intel Core i7-3930K Hexa Core | 64 GB DDR3 RAM | 2x 3 TB SATA III HDD |
| EX40 | Intel Core i7-4770 Quad Core | 32 GB DDR3 RAM | 2x 2 TB SATA III Enterprise HDD |
| EX40-SSD | Intel Core i7-4770 Quad Core | 32 GB DDR3 RAM | 2x 240 GB SATA III SSD |
| EX40-Hybrid | Intel Core i7-4770 Quad Core | 32 GB DDR3 RAM | 2x 2TB Sata3 HDD + 2× 240 GB SATA3 SSD |
| EX60 | Intel Core i7-920/930/950 Quad Core | 48 GB DDR3 RAM | 2x 2 TB SATA II Enterprise HDD |
| EX41 | Intel Core i7-6700 Quad Core | 32 GB DDR4 | 2× 4 TB SATA3, Enterprise |
| EX41-SSD | Intel Core i7-6700 Quad Core | 32 GB DDR4 | 2× 500 GB SSD |
| EX41S | Intel Core i7-6700 Quad Core | 64 GB DDR4 | 2× 2 TB SATA3, Enterprise |
| EX41S-SSD | Intel Core i7-6700 Quad Core | 64 GB DDR4 | 2× 250 GB SSD |
| EX42 | Intel Core i7-7700 Quad Core | 64 GB DDR4 | 2× 4 TB SATA3, Enterprise |
| EX42-NVMe | Intel Core i7-7700 Quad Core | 64 GB DDR4 | 2× 512 GB NVMe SSD |
| EX43 | Intel Core i5-12500 Hexa Core | 64 GB DDR4 | 2× 512 GB M.2 NVMe SSD (PCIe Gen4) |
| EX51 | Intel Core i7-6700 Quad Core | 64 GB DDR4 | 2× 4 TB SATA3, Enterprise |
| EX51-SSD | Intel Core i7-6700 Quad Core | 64 GB DDR4 | 2× 500 GB SSD |
| EX51-SSD-GPU | Intel Core i7-6700 Quad Core | 64 GB DDR4 | 2× 500 GB SSD |
| EX52 | Intel Core i7-8700 Hexa Core | 64 GB DDR4 | 2× 8 TB SATA3, Enterprise |
| EX52-NVMe | Intel Core i7-8700 Hexa Core | 64 GB DDR4 | 2× 1024 GB NVMe SSD |
| EX61 | Intel Core i7-8700 Hexa Core | 64 GB DDR4 | 2× 6 TB SATA3, Enterprise |
| EX61-NVMe | Intel Core i7-8700 Hexa Core | 64 GB DDR4 | 2× 512 GB NVMe SSD |
| EX62 | Intel Core i7-8700 Hexa Core | 64 GB DDR4 | 2× 8 TB SATA3, Enterprise |
| EX62-NVMe | Intel Core i9-9900K Octa Core | 64 GB DDR4 | 2× 1024 GB NVMe SSD |
| EX100 | Intel Core i9-12900 16-core | 128 GB DDR4 | 2× 1920 GB U.2 NVMe DC SSD (PCIe Gen4) |
| EX101 | Intel Core i9-13900 24-core | 64 GB DDR5 ECC | 2× 1920 GB U.2 NVMe DC SSD (PCIe Gen4) |
XS Servers
| Model | Processor | RAM | Disk |
|---|---|---|---|
| XS13 | Intel Core i7-920 Quad Core | 12 GB DDR3 RAM | 7x 3 TB SATA II HDD |
| XS29 | Intel Xeon E3-1245 Quad Core | 32 GB DDR3 ECC RAM | 15x 3 TB SATA III HDD |
PX Servers
See: https://www.hetzner.com/dedicated-rootserver/matrix-px
| Model | Processor | RAM | Disk |
|---|---|---|---|
| PX60 | Intel Xeon E3-1270 v3 Quad Core | 32 GB DDR3 ECC RAM | 2x 2 TB SATA III Enterprise HDD |
| PX60-SSD | Intel Xeon E3-1270 v3 Quad Core | 32 GB DDR3 ECC RAM | 2x 240 GB SATA III Data Center Series SSD |
| PX61 | Intel Xeon E3-1275 v5 Quad Core | 64 GB DDR4 ECC | 2× 4 TB SATA3 HDD, Enterprise |
| PX61-SSD | Intel Xeon E3-1275 v5 Quad Core | 64 GB DDR4 ECC | 2× 480 GB SATA SSD Data Center Series |
| PX61-NVMe | Intel Xeon E3-1275 v5 Quad Core | 64 GB DDR4 ECC | 2× 512 GB NVMe SSD |
| PX62 | Intel Xeon E-2176G Hexa Core Intel Xeon E-2276G Hexa Core |
64 GB DDR4 ECC non reg. RAM | 2x 8 TB Enterprise HDD or 2x 12 TB Enterprise HDD |
| PX62-NVMe | Intel Xeon E-2176G Hexa Core Intel Xeon E-2276G Hexa Core |
64 GB DDR4 ECC non reg. RAM | 2x 960 GB U.2 DC NVMe SSD |
| PX70 | Intel Xeon E3-1270 v3 Quad Core | 32 GB DDR3 ECC RAM | 2x 4 TB SATA III Enterprise HDD |
| PX70-SSD | Intel Xeon E3-1270 v3 Quad Core | 32 GB DDR3 ECC RAM | 2x 480 GB SATA III Data Center Series SSD |
| PX80 | AMD Opteron 6338P 12 Core | 64 GB DDR3 ECC RAM | 2x 2 TB SATA III Enterprise HDD |
| PX90 | Intel Xeon E5-1650 v2 Hexa Core | 64 GB DDR3 ECC RAM | 2x 2 TB SATA III Enterprise HDD |
| PX90-SSD | Intel Xeon E5-1650 v2 Hexa Core | 64 GB DDR3 ECC RAM | 2x 240 GB SATA III Data Center Series SSD |
| PX120 | Intel Xeon E5-1650 v2 Hexa Core | 128 GB DDR3 ECC RAM | 2x 2 TB SATA III Enterprise HDD |
| PX120-SSD | Intel Xeon E5-1650 v2 Hexa Core | 128 GB DDR3 ECC RAM | 2x 240 GB SATA III Data Center Series SSD |
| PX91 | Intel Xeon E5-1650 v3 Hexa Core | 128 GB DDR4 ECC | 2× 2 TB SATA3, Enterprise |
| PX91-SSD | Intel Xeon E5-1650 v3 Hexa Core | 128 GB DDR4 ECC | 2× 240 GB SATA3 Data Center Series SSD |
| PX92 | Intel Xeon W-2145 | 128 GB DDR4 | Individual drive configuration |
| PX121 | Intel Xeon E5-1650 v3 Hexa Core | 256 GB DDR4 ECC | 2× 4 TB SATA3, Enterprise |
| PX121-SSD | Intel Xeon E5-1650 v3 Hexa Core | 256 GB DDR4 ECC | 2× 480 GB SATA3 Data Center Series SSD |
SX Servers
See: https://www.hetzner.com/dedicated-rootserver/matrix-sx
| Model | Processor | RAM | Disk |
|---|---|---|---|
| SX60 | Intel Core i7-2600 Quad Core | 16 GB DDR3 | 4× 4 TB SATA3, 24/7 certified |
| SX130 | Intel Core i7-3770 Quad Core | 32 GB DDR3 | 7× 4 TB SATA3, 24/7 certified |
| SX290 | Intel Xeon E3-1245 Quad Core | 32 GB DDR3 ECC | 15× 4 TB SATA3, 24/7 certified |
| SX61 | Intel i7-3770 Quad Core | 32 GB DDR3 | 4× 6 TB SATA3, Enterprise, HW RAID |
| SX131 | Intel Xeon E5-1650 v2 Hexa Core | 64 GB DDR3 ECC | 10× 6 TB SATA3, Enterprise |
| SX291 | Intel Xeon E5-1650 v2 Hexa Core | 128 GB DDR3 ECC | 15× 6 TB SATA3, Enterprise, HW RAID |
| SX62 | Intel Xeon E3-1270 v3 Quad-Core | 32 GB DDR3 ECC | 4x 10 TB SATA3, Enterprise |
| SX132 | Intel Xeon E5-1650 v3 Hexa-Core | 128 GB DDR4 ECC | 10x 10 TB SATA3, Enterprise |
| SX292 | Intel Xeon E5-1650 v3 Hexa-Core | 256 GB DDR4 ECC | 15x 10 TB SATA3, Enterprise, HW RAID |
| SX63 | Intel Xeon E3-1275 v5 Quad-Core | 64 GB DDR4 ECC | 4x 16 TB SATA3, Enterprise |
| SX133 | Intel Xeon W-2145 Octa-Core | 128 GB DDR4 ECC | 2x 960 GB NVMe SSD + 10x 16 TB SATA6, Enterprise |
| SX293 | Intel Xeon W-2145 Octa-Core | 256 GB DDR4 ECC | 2x 1.92 GB NVMe SSD + 14x 16 TB SATA6, Enterprise |
DX Servers
See: https://www.hetzner.com/dedicated-rootserver/matrix-dell
| Model | Processor | RAM | Disk |
|---|---|---|---|
| DX150 | Intel® Xeon® E5-2620 Hexa Core | 64 GB DDR3 ECC reg. | individual configuration for disks |
| DX290 | 2× Intel® Xeon® E5-2620 Hexa Core | 128 GB DDR3 ECC reg. | individual configuration for disks |
| DX141 | Intel® Xeon® E5-1650 v3 Hexa Core | 64 GB DDR4 ECC reg. | individual configuration for disks |
| DX151 | Intel® Xeon® E5-2600 v3 Octa Core | 64 GB DDR4 ECC reg. | individual configuration for disks |
| DX291 | 2× Intel® Xeon® E5-2600 v3 Octa Core | 128 GB DDR4 ECC reg. | individual configuration for disks |
| DX180 | AMD EPYC™ 7551P 32-Core | 128 GB DDR4 ECC reg. | individual configuration for disks |
| DX152 | 2x Intel® Xeon® Silver | 64 GB DDR4 ECC reg. | individual configuration for disks |
| DX292 | 2x Intel® Xeon® Gold | 64 GB DDR4 ECC reg. | individual configuration for disks |
| DX181 | AMD EPYC™ 7502P 32-Core | 128 GB DDR4 ECC reg. | individual configuration for disks |
| DX153 | 2x Intel® Xeon® Silver | 64 GB DDR5 ECC reg. | individual configuration for disks |
| DX293 | 2x Intel® Xeon® Gold | 64 GB DDR5 ECC reg. | individual configuration for disks |
| DX182 | AMD EPYC™ 9454P 48-Core | 128 GB DDR5 ECC reg. | individual configuration for disks |
- Valid for orders starting on 27 April 2023.↩
- The DX182 has a base configuration with a total possible amount of 128 GB DDR5 ECC reg. RAM (4 x 32 GB). You can upgrade the server in increments of 32 GB and can go up to a total of 384 GB DDR5 ECC reg. RAM (12 x 32 GB). If you need more RAM than that, you can increase it using increments of 64 GB and go up to a total of 768 GB (12 x 64 GB). Or if you need even more, you can choose 96 GB increments and go up to a total of 1152 GB RAM (12 x 96 GB). Important note: All the 32 GB RAM modules included in the base configuration will need to be removed and the price will not be offset in the price. The 64 GB RAM and 96 GB RAM modules are not inlcuded in the basic price. There is a monthly fee for each individual module.↩
- The AX162-S is equipped with a total of 128 GB DDR5 ECC reg. RAM (4 x 32 GB) in the basic configuration. You can upgrade the server in 32 GB increments up to 384 GB DDR5 ECC reg. RAM (12 x 32 GB). If you require more RAM, you can first order up to 786 GB (12 x 64 GB) in 64 GB increments and then up to 1152 GB RAM (12 x 96 GB) in 96 GB increments. Please note that all 32 GB RAM modules included as standard must be removed for this and cannot be offset. The 64 GB RAM and 96 GB RAM modules are therefore not included in the base price. There is a monthly fee for each individual module.↩
- The AX162-R is equipped with a total of 256 GB DDR5 ECC reg. RAM (8 x 32 GB) in the basic configuration. You can upgrade the server in 32 GB increments up to 384 GB DDR5 ECC reg. RAM (12 x 32 GB). If you require more RAM, you can first order up to 786 GB (12 x 64 GB) in 64 GB increments and then up to 1152 GB RAM (12 x 96 GB) in 96 GB increments. Please note that all 32 GB RAM modules included as standard must be removed for this and cannot be offset. The 64 GB RAM and 96 GB RAM modules are therefore not included in the base price. There is a monthly fee for each individual module.↩
- The EX130-S is equipped with a total of 128 GB DDR5 ECC reg. RAM (4 x 32 GB) in the basic configuration. You can upgrade the server in 32 GB increments up to 256 GB DDR5 ECC reg. RAM (8 x 32 GB). If you require more RAM, you can order up to 512 GB (8 x 64 GB) in 64 GB increments and then up to 768 GB RAM (8 x 96 GB) in 96 GB increments. Please note that all 32 GB RAM modules included as standard must be removed for this and cannot be offset. The 64 GB RAM and 96 GB RAM modules are therefore not included in the basic price. There is a monthly charge for each individual module.↩
- The EX130-R is equipped with a total of 256 GB DDR5 ECC reg. RAM (8 x 32 GB) in the basic configuration. If you require more RAM, you can order up to 512 GB (8 x 64 GB) in 64 GB increments and then up to 768 GB RAM (8 x 96 GB) in 96 GB increments. Please note that all 32 GB RAM modules included as standard must be removed for this and cannot be offset. The 64 GB RAM and 96 GB RAM modules are therefore not included in the base price. There is a monthly fee for each individual module.↩
- Valid for orders starting on 27 April 2023.↩
- We offer a Switch Management option. Per switch, this service costs an additional € 252.00 ($ 280.00) excl. VAT per month. Customers who decide to use this service will no longer have access to the switches. For an additional cost of € 21.00 ($ 24.00) excl. VAT per 15 minutes, we will configure the switches for the customer and monitor their availability. We will also keep a replacement switch with the same configurations. If the switches fail, we can and will replace them for free. For customers who don't want to use the managed service, we will provide full access to the switches. In that case the customer confirms their knowledge of how to administrate a Juniper switch properly. If they don’t choose the managed option, Hetzner will not offer any support. Additionally, we do not keep spare parts for unmanaged switches.↩
- Valid for orders starting on 01 September 2022.↩